Home » Products » Regular LED Strip » UV LED Strip Light » UVC Led Bar Light UVC Led Disinfection Module 265-278nm Air Sterilization

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

UVC Led Bar Light UVC Led Disinfection Module 265-278nm Air Sterilization

UVC Led bar light UVC Led disinfection module

Availability:

UVC Led bar light UVC Led disinfection module 265-278nm air sterilization

Features

1. Item No.: STRG-15UVC3535

2. Light Source: UVC LED chip

3. Input Voltage: DC24V

4. Power Consumption: 5.8W/PCS

5. Wavelength: 265~278nm

6. Dimensions: 200mm*35mm

7. Beam angle: 120 degree

8. Radiant Flux 90mw/pcs

IMG_20200512_173144

IMG_20200512_173227


Structure of the UVC Led bar light UVC Led disinfection module 265-278nm air sterilization

1.15pcs UVC LED chip per piece 

2.Good stability, CE & RoHS approved 

3.Aluminium PCB stable quality and good heat dissipation


IMG_20200512_173147

IMG_20200512_173308


UVC Led chip information

UVC LED chip

wavelength

Technological Parameters

01

02

Application of the UVC Led bar light UVC Led disinfection module 265-278nm air sterilization

Our UVC Led bar light is the compact module which can be used for water purifying systems, air ventilation systems, and surface disinfection. It uses 15 of 5mW UVC LEDs which emits light at 278nm. This wavelength is able to break down cells and molecular bonds to either disable or kill viruses and bacteria to effectively reduce chances of sickness and infection.

IMG_20200512_173509


Attention when use the UVC Led bar light UVC Led disinfection module 265-278nm air sterilization

1. Pay special attention: UV lamps, please do not look directly at the light source with the naked eye! Test please wear special goggles!

2. Please read the product instructions carefully before the product is installed and used;

3. The power output must be DC24V

4. The product is lightly put, to avoid damage to the product, please hand over to  professionals to install and repair, maintenance

5. When wiring must cut off the external power supply, to prevent people from touching or  damage the lamp, the product must be installed after the installation before powering

6. It is forbidden to press the surface of the LED

IMG_20200512_173144


Please check the product specification for details. STRG-15UVC3535-24v.pdf


Previous: 
Next: 
DMX Lighting System
UVC LED Disinfection
             Contact Us
Suntech LED Logo
 6th Floor, Building B, 
Xiangdali Industrial Park, East Baoshi Road, Baoan District, Shenzhen, China
  (+86)-18588265235
Shenzhen Suntech Company Limited
 
          QR Code
​Copyright ©2021 Yacht. All rights reserved  Sitemap